Бүтээгдэхүүний дэлгэрэнгүй тайлбар
APPLICATION
This kind of Instrument cable is suitable for instruments and other electrical equipment in the signal transmission and control circuit. The armoured Instrument Cable are generally use for outdoor installation and suitable for wet and damp areas.
STANDARD
IEC 60502, BS 5308, GB 9330
CONSTRUCTION
Conductor: copper;
Insulation: PVC, XLPE, PE
Screen: copper (plastic) /aluminum(plastic) tape
Armoured: Galvanized steel wire
Sheath: PVC sheathnstrument cable 1x 2x 1 mm2
TECHNICAL SPECIFICATIONS
| Conductor | Annealed or tinned copper, sizes: 0.5mm² and 0.75mm² mulitistranded(Class 5), |
| 0.5 mm², 1.0 mm² solid(Class 1), 1.5mm² or 2.5mm², multistranded(Class 2) to BS6360 | |
| Insulation | PE (Polyethylene) type 03 to BS6234 |
| Pairing | Two or three insulated conductors uniformly twisted together with a lay not exceeding 100mm |
| Colour code | See technical information |
| Binder tape | PETP transparent tape |
| Collective screen | Aluminium/polyester tape is applied over the laid up pairs metallic side down in contact with tinned copper drain wire, 0.5mm² |
| Outer sheath | PVC Sheath, type TM 1 or type 6 to BS 6746 |
| Sheath colour | Black or blue |
